Zmorph VX - CNC Milling File Starting and Calibration

CNC milling workow
120
Now you can check generated G-code and save it. Start your le according to 13.6 part
of the manual.
13.6 CNC Milling le starting (with calibration)
Enter the 'New Job’
menu.
Go to the 'Choose le’
section.
Files uploaded to the in-
ternal SD card are locat-
ed in the 'INTERNAL’ tab,
les uploaded to the SD
card are located in the
'EXTERNAL’ tab.
After uploading the le to an internal card or inserting an external SD card with the pre-
pared le:
NOTE: If the user inserted the external SD card the screen should jump forward to the
'Choose File' section screen on the 'EXTERNAL’ directory.