Zmorph VX - Page 51

3D printing workow
51
• Extrusion: Direct Drive
• Work area: 235 x 250 x 165 mm
• Recommended printing resolution: 0.2 mm (200 microns)
• Supported printing resolution: 0.05-0.4 mm
• Extruder dimensions: 150 x 115 x 55 mm
Dual PRO Extruder
Basic toolhead giving access to all 3D printing functionalities, using 1.75 mm laments.
It’s perfect for manufacturing double-material prototypes, jigs and xtures and other
high-quality models from almost all materials available on the market as: ABS, M-ABS,
PLA, HIPS, Flex, PVA, PET, ASA and others. Dual PRO 1.75 mm is included in VX Full Set
machine sets. Default nozzle is 0.4 mm.
Specication:
• Construction: High-quality 3 mm aluminum frame
• Hot End: ZMorph interchangeable Mixer Hotend
Extruder gear
Cooling fan
Nozzle
Heating block
Thermistor
Heat break
plug (A, B)
Pressure adjustment screws
Stepper motor 1.75
Toolhead cables (left, right)