Zmorph VX - Page 144

Thick Paste Extruder workow
144
Connect the "A" cable to
the A cable from X-car-
riage.
Turn on the machine. Enter the "Maintenance"
menu.
Go back to the "main
menu" screen.
Enter the "New Job". Choose le and press
"NEXT" button.
Go to the "Settings" op-
tion.
Push the "extrude/ex-
tract paste" button until
the paste ow from the
syringe.
Go to the "Change Tool"
option.
Go to the "3D printing". Choose "Thick Paste
printing" option.