Zmorph VX - Page 34

Maintenance
34
Single Plastic Extruder 1.75
• Connect the LEFT cable to the LEFT
frame socket.
• Connect the extruder '"A" cable to X car-
riage "A" plug.
• Choose "Maintenance".
• Choose "Change tool".
• Choose "3D printing".
• Choose "Single printing".
• Choose "Single 1.75".
Dual PRO
• Connect the LEFT cable to the LEFT
frame socket and RIGHT cable to the
RIGHT frame socket.
• Connect the extruder "A" cable to the "A"
plug and the "B" cable to the "B" plug on
the X carriage.
• Choose "Maintenance".
• Choose "Change tool".
• Choose "3D printing".
• Choose "Dual printing".
• Choose "Dual PRO".
CNC PRO Milling Toolhead
• Connect the LEFT cable to the LEFT frame socket.
• Connect the extruder "A" cable to X carriage "A" plug.
• Choose "Maintenance".
• Choose "Change tool".
• Choose "CNC".
Next steps depend on which toolhead will be used:
Laser PRO
• Connect the LEFT cable to the LEFT
frame socket and RIGHT cable to the
RIGHT frame socket.
• Choose "Maintenance".
• Choose "Change tool".
• Choose "Laser".
Thick Paste Extruder
• Connect the LEFT cable to the LEFT
frame socket.
• Connect the extruder "A" cable to X car-
riage "A" plug.
• Choose "Maintenance".
• Choose "Change tool".
• Choose "3D printing".
• Choose "Thickpaste printing".