Voxelizer
44
the fabrication process by specifying the used materials and other settings; during the
third step instructions for the machine (G-code) are generated, previewed and exported.
Taking the 3D printing workow as an example, after selecting the tool in the welcome
wizard, import a model in one of the different formats supported, for instance, an .STL.
In the Scene view, it’s possible to set its dimensions and orientation. When nished, click
Next.
In the settings view, apply the main presets, based on the type of lament that is going to
be used. It’s possible to dig deeper into the different, more advanced settings and apply
further transformations to the model via lters and voxel selection. When everything is
set up, click Next to generate the G-code.
To Next Page
Loading...
