EasyManua.ls Logo

ZyXEL Communications PMG5317-T20A - The Upnp Screen

ZyXEL Communications PMG5317-T20A
322 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 8 Home Networking
PMG5317-T20A User’s Guide
117
If you click Static DHCP Configuration in the Static DHCP screen or the Edit icon next to a static
DHCP entry, the following screen displays.
Figure 45 Static DHCP: Static DHCP Configuration/Edit
The following table describes the labels in this screen.
8.4 The UPnP Screen
Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. A UPnP device can dynamically join a
network, obtain an IP address, convey its capabilities and learn about other devices on the network.
In turn, a device can leave a network smoothly and automatically when it is no longer in use.
IP Address This field displays the IP address relative to the # field listed above.
Modify Click the Edit icon to have the IP address field editable and change it.
Click the Delete icon to delete a static DHCP entry. A window displays asking you to
confirm that you want to delete the selected entry.
Table 24 Static DHCP: Static DHCP Configuration/Edit
LABEL DESCRIPTION
Active Select this to activate the connection between the client and the GPON Device.
Group Name Select the interface group name for which you want to configure static DHCP settings.
See Chapter 13 on page 171 for how to create a new interface group.
IP Type This field displays IPv4 for the type of the DHCP IP address. At the time of writing, it is
not allowed to select other type.
Select Device Info Select a device or computer from the drop-down list or select Manual Input to manually
enter a device’s MAC address and IP address in the following fields.
MAC Address If you select Manual Input, enter the MAC address of a computer on your LAN.
IP Address If you select Manual Input, enter the IP address that you want to assign to the
computer on your LAN with the MAC address that you will also specify.
OK
Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving.
Table 23 Network Setting > Home Networking > Static DHCP
LABEL DESCRIPTION

Table of Contents

Other manuals for ZyXEL Communications PMG5317-T20A

Related product manuals