ZyXEL Communications PMG5317-T20A - Navigation Panel

Chapter 2 The Web Configurator
PMG5317-T20A User’s Guide
25
The icons provide the following functions.
2.2.2 Navigation Panel
Use the menu items on the navigation panel to open screens to configure GPON Device features.
The following tables describe each menu item.
Table 3 Web Configurator Icons in the Title Bar
ICON DESCRIPTION
Language: Select the language you prefer.
Quick Start: Click this icon to open screens where you can configure the GPON Device’s
time zone Internet access, and wireless settings.
Logout: Click this icon to log out of the web configurator.
Table 4 Navigation Panel Summary
LINK TAB FUNCTION
Connection Status This screen shows the network status of the GPON Device and
computers/devices connected to it.
Network Setting
Broadband Broadband Use this screen to view and configure ISP parameters, WAN IP
address assignment, and other advanced properties. You can also add
new WAN connections.
Wireless General Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
Guest/More AP Use this screen to configure multiple BSSs on the GPON Device.
MAC
Authentication
Use this screen to block or allow wireless traffic from wireless devices
of certain SSIDs and MAC addresses to the GPON Device.
WPS Use this screen to configure and view your WPS (Wi-Fi Protected
Setup) settings.
WMM Use this screen to enable or disable Wi-Fi MultiMedia (WMM).
Others Use this screen to configure advanced wireless settings.
Channel Status Use this screen to scan wireless LAN channel noises and view the
results.
Home
Networking
LAN Setup Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
Static DHCP Use this screen to assign specific IP addresses to individual MAC
addresses.
UPnP Use this screen to turn UPnP and UPnP NAT-T on or off.
Additional
Subnet
Use this screen to configure IP alias and public static IP.
TFTP Server
Name
Configure a TFTP server name which is sent to clients using DHCP
option 66.
Routing Static Route Use this screen to view and set up static routes on the GPON Device.
DNS Route
Use this screen to forward DNS queries for certain domain names
through a specific WAN interface to its DNS server(s).
Policy Route
Use this screen to configure policy routing on the GPON Device.
RIP Use this screen to configure Routing Information Protocol to
exchange routing information with other routers.