Chapter 20 Voice
PMG5317-T20A User’s Guide
207
20.3 The SIP Account Screen
The GPON Device uses a SIP account to make outgoing VoIP calls and check if an incoming call’s
destination number matches your SIP account’s SIP number. In order to make or receive a VoIP
call, you need to enable and configure a SIP account, and map it to a phone port. The SIP account
contains information that allows your GPON Device to connect to your VoIP service provider.
See Section 20.3.1 on page 207 for how to map a SIP account to a phone port.
Use this screen to view SIP account information. You can also enable and disable each SIP account.
To access this screen, click VoIP > SIP > SIP Account.
Figure 117 VoIP > SIP > SIP Account
Each field is described in the following table.
20.3.1 The SIP Account Add/Edit Screen
Use this screen to configure a SIP account and map it to a phone port. To access this screen, click
the Add New Account button or click the Edit icon of an entry in the VoIP > SIP > SIP Account
screen.
Table 88 VoIP > SIP > SIP Account
LABEL DESCRIPTION
Add New Account Click this to configure a SIP account.
# This is the index number of the entry.
Enable This shows whether the SIP account is activated or not.
A yellow bulb signifies that this SIP account is activated. A gray bulb signifies that this SIP
account is not activated.
SIP Account
This shows the name of the SIP account.
Service Provider This shows the name of the SIP service provider.
Account Number. This shows the SIP number.
Modify Click the Edit icon to configure the SIP account.
Click the Delete icon to delete this SIP account from the GPON Device.
To Next Page
Loading...
