ZyXEL Communications PMG5317-T20A - The Add New Share Screen

Chapter 14 USB Service
PMG5317-T20A User’s Guide
179
14.2.1 The Add New Share Screen
Use this screen to set up a new share or edit an existing share on the GPON Device. Click Add new
share in the File Sharing screen or click the Edit icon next to an existing share.
Please note that you need to set up your shares in the USB before enabling file sharing in the GPON
Device. Also, the following special characters are not allowed for the USB share name: ", ', `, <, >,
^, $, |, &, ;, \, /, :, *, and ?.
Figure 92 Network Setting > USB Service > File Sharing > Add New Share
Each field is described in the following table.
Status This field shows the status of the user.
: The user account is not activated for the share.
: The user account is activated for the share.
User Name
This is the name of a user who is allowed to access the secured shares on the USB device.
Modify Click the Edit icon to modify the user account.
Click the Delete icon to remove the user account from the GPON Device.
Apply
Click this to save your changes to the GPON Device.
Cancel Click this to restore your previously saved settings.
Table 65 Network Setting > USB Service > File Sharing
LABEL DESCRIPTION
Table 66 Network Setting > USB Service > File Sharing > Add New Share
LABEL DESCRIPTION
Volume Select the volume in the USB storage device that you want to add as a share in
the GPON Device.
This field is read-only when you are editing the share.
Share Path Manually enter the file path for the share, or click the Browse button and select
the folder that you want to add as a share.
This field is read-only when you are editing the share.
Description You can either enter a short description of the share, or leave this field blank.
Access Level Select Public if you want the share to be accessed by users connecting to the
GPON Device. Otherwise, select Security.