EasyManua.ls Logo

ZyXEL Communications PMG5317-T20A - The Add Trust Domain Screen; The Trust Domain Screen

ZyXEL Communications PMG5317-T20A
322 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 28 Remote Management
PMG5317-T20A User’s Guide
252
28.3 The Trust Domain Screen
Use this screen to view a list of public IP addresses which are allowed to access the GPON Device
through the services configured in the Maintenance > Remote Management screen. Click
Maintenance > Remote Management > Trust Domain to open the following screen.
Note: If this list is empty, all public IP addresses can access the GPON Device from the
WAN through the specified services.
Figure 144 Maintenance > Remote Management > Trust Domain
The following table describes the fields in this screen.
28.3.1 The Add Trust Domain Screen
Use this screen to configure a public IP address which is allowed to access the GPON Device. Click
the Add Trust Domain button in the Maintenance > Remote Management > Trust Domain
screen to open the following screen.
LAN/WLAN Select the Enable check box for the corresponding services that you want to allow access to
the GPON Device from the LAN/WLAN.
WAN Select the Enable check box for the corresponding services that you want to allow access to
the GPON Device from all WAN connections.
Trust Domain Select the Enable check box for the corresponding services that you want to allow access to
the GPON Device from the trusted hosts configured in the Maintenance > Remote MGMT
> Trust Domain screen.
If you only want certain WAN connections to have access to the GPON Device using the
corresponding services, then clear WAN, select Trust Domain and configure the allowed IP
address(es) in the Trust Domain screen.
Port You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Apply Click Apply to save your changes back to the GPON Device.
Cancel Click Cancel to restore your previously saved settings.
Table 116 Maintenance > Remote Management > MGMT Services (continued)
LABEL DESCRIPTION
Table 117 Maintenance > Remote Management > Trust Domain
LABEL DESCRIPTION
Add Trust
Domain
Click this to add a trusted host IP address.
IP Address This field shows a trusted host IP address.
Delete Click the Delete icon to remove the trust IP address.

Table of Contents

Other manuals for ZyXEL Communications PMG5317-T20A

Related product manuals