ZyXEL Communications PMG5317-T20A - Access the GPON Device Using DDNS

Chapter 4 Tutorials
PMG5317-T20A User’s Guide
60
This maps e-mail traffic coming from port 25 to the highest priority, which you have created in the
previous screen (see the IP Protocol field). This also maps your computer’s IP address and MAC
address to the E-mail queue (see the Source fields).
4.10 Access the GPON Device Using DDNS
If you connect your GPON Device to the Internet and it uses a dynamic WAN IP address, it is
inconvenient for you to manage the device from the Internet. The GPON Device’s WAN IP address
changes dynamically. Dynamic DNS (DDNS) allows you to access the GPON Device using a domain
name.
To use this feature, you have to apply for DDNS service at www.dyndns.org.
This tutorial covers:
• Registering a DDNS Account on www.dyndns.org
• Configuring DDNS on Your GPON Device
• Testing the DDNS Setting
Note: If you have a private WAN IP address, then you cannot use DDNS.
4.10.1 Registering a DDNS Account on www.dyndns.org
1 Open a browser and type http://www.dyndns.org.
2 Apply for a user account. This tutorial uses UserName1 and 12345 as the username and
password.
3 Log into www.dyndns.org using your account.
4 Add a new DDNS host name. This tutorial uses the following settings as an example.
•Hostname: zyxelrouter.dyndns.org
•Service Type: Host with IP address
MAC Address Type the MAC address of your computer - AA:FF:AA:FF:AA:FF. Type the MAC Mask if you
know it.
To Queue
Index
Link this to an item in the Network Setting > QoS > Queue Setup screen, which is the E-
mail queue created in this example.
w.x.y.z
a.b.c.d
http://zyxelrouter.dyndns.org
A