Chapter 12 Dynamic DNS Setup
PMG5317-T20A User’s Guide
168
If you have a private WAN IP address, then you cannot use Dynamic DNS.
12.2 The DNS Entry Screen
Use this screen to view and configure DNS routes on the GPON Device. Click Network Setting >
DNS to open the DNS Entry screen.
Figure 83 Network Setting > DNS > DNS Entry
The following table describes the fields in this screen.
12.2.1 Add/Edit DNS Entry
You can manually add or edit the GPON Device’s DNS name and IP address entry. Click Add New
DNS Entry in the DNS Entry screen or the Edit icon next to the entry you want to edit. The screen
shown next appears.
Figure 84 DNS Entry: Add/Edit
Table 59 Network Setting > DNS > DNS Entry
LABEL DESCRIPTION
Add New DNS
Entry
Click this to create a new DNS entry.
# This is the index number of the entry.
Hostname This indicates the host name or domain name.
IP Address This indicates the IP address assigned to this computer.
Modify Click the Edit icon to edit the rule.
Click the Delete icon to delete an existing rule.
To Next Page
Loading...
