Chapter 34 Backup/Restore
PMG5317-T20A User’s Guide
267
Figure 159 Reset Warning Message
Figure 160 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory defaults of your GPON
Device. Refer to Section 1.6 on page 21 for more information on the RESET button.
34.3 The Reboot Screen
System restart allows you to reboot the GPON Device remotely without turning the power off. You
may need to do this if the GPON Device hangs, for example.
Click Maintenance > Reboot. Click Reboot to have the GPON Device reboot. This does not affect
the GPON Device's configuration.
Figure 161 Maintenance > Reboot
To Next Page
Loading...
