ZyXEL Communications PMG5317-T20A - Configuring Static Route for Routing to Another Network

Chapter 4 Tutorials
PMG5317-T20A User’s Guide
55
3 The screen shows you the list of available media files in the USB storage device. Select the file you
want to open and push the Play button in the remote control.
Tutorial: Media Sharing using DMA-2500 (2)
4.8 Configuring Static Route for Routing to Another
Network
In order to extend your Intranet and control traffic flowing directions, you may connect a router to
the GPON Device’s LAN. The router may be used to separate two department networks. This tutorial
shows how to configure a static routing rule for two network routings.
In the following figure, router R is connected to the GPON Device’s LAN. R connects to two
networks, N1 (192.168.1.x/24) and N2 (192.168.10.x/24). If you want to send traffic from
computer A (in N1 network) to computer B (in N2 network), the traffic is sent to the GPON
Device’s WAN default gateway by default. In this case, B will never receive the traffic.
N2
B
N1
A
R