PMG5317-T20A User’s Guide
240
CHAPTER 23
VoIP Status
23.1 The VoIP Status Screen
Click System Monitor > VoIP Status to open the following screen. You can view the VoIP
registration, current call status and phone numbers in this screen.
Figure 137 System Monitor > VoIP Status
The following table describes the fields in this screen.
Table 110 System Monitor > VoIP Status
LABEL DESCRIPTION
Poll Interval(s) Enter the number of seconds the GPON Device needs to wait before updating this screen
and then click Set Interval. Click Stop to have the GPON Device stop updating this screen.
SIP Status
Account This column displays the index of each SIP account that has already configured in the GPON
Device.
Registration This field displays the current registration status of the SIP account.Registered - The SIP
account is activated and has registered with a SIP server.
Unregistered - The GPON Device is activated and tries to register the SIP account with the
SIP server, the attempt fails. A registration auto-recovery mechanism should be activated
so that the GPON Device will automatically try to register the SIP account again after a
period of time, and you can activate it in VoIP > SIP > SIP Service Provider > Edit >
SIP Register Fail Re-Try Timer. The GPON Device will recover to Registered state until
the Register button in the Connection Status > Status page is pressed.
Disabled - The SIP account is not active. You have to make sure the corresponding SIP
Service Provider and SIP Account are both enabled for proper activation. You can activate
them in VoIP > SIP > SIP Service Provider > Edit > Enable SIP Service Provider
and VoIP > SIP > SIP Account > Edit > Enable SIP Account.
Registration
Time
This field displays the last time the GPON Device successfully registered the SIP account on
the SIP server. The field is blank if the SIP has not yet successfully registered this account.
To Next Page
Loading...
