PMG5317-T20A User’s Guide
251
CHAPTER 28
Remote Management
28.1 Overview
Remote management controls through which interface(s), which services can access the GPON
Device.
Note: The GPON Device is managed using the Web Configurator.
28.2 The MGMT Services Screen
Use this screen to configure through which interface(s), which services can access the GPON
Device. You can also specify the port numbers the services must use to connect to the GPON
Device. Click Maintenance > Remote Management > MGMT Services to open the following
screen.
Figure 143 Maintenance > Remote Management > MGMT Services
The following table describes the fields in this screen.
Table 116 Maintenance > Remote Management > MGMT Services
LABEL DESCRIPTION
WAN Interface
used for
services
Select Any_WAN to have the GPON Device automatically activate the remote management
service when any WAN connection is up.
Select Multi_WAN and then select one or more WAN connections to have the GPON Device
activate the remote management service when the selected WAN connections are up.
service This is the service you may use to access the GPON Device.
To Next Page
Loading...
