Chapter 20 Voice
PMG5317-T20A User’s Guide
218
20.6 The Region Screen
Use this screen to maintain settings that depend on which region of the world the GPON Device is
in. To access this screen, click VoIP > Phone > Region.
Figure 123 VoIP > Phone > Region
Each field is described in the following table.
20.7 The Call Rule Screen
Use this screen to add, edit, or remove speed-dial numbers for outgoing calls. Speed dial provides
shortcuts for dialing frequently-used (VoIP) phone numbers. You also have to create speed-dial
entries if you want to call SIP numbers that contain letters. Once you have configured a speed dial
rule, you can use a shortcut (the speed dial number, #01 for example) on your phone's keypad to
call the phone number.
Click VoIP > Call Rule > Speed Dial. The following screen displays.
Table 94 VoIP > Phone > Region
LABEL DESCRIPTION
Region Settings Select the place in which the GPON Device is located.
Call Service Mode Select the mode for supplementary phone services (call hold, call waiting, call transfer
and three-way conference calls) that your VoIP service provider supports.
Europe Type - use supplementary phone services in European mode
USA Type - use supplementary phone services American mode
You might have to subscribe to these services to use them. Contact your VoIP service
provider.
Apply
Click this to save your changes and to apply them to the GPON Device.
Cancel Click this to set every field in this screen to its last-saved value.
To Next Page
Loading...
