ZyXEL Communications PMG5317-T20A - The Web Configurator

PMG5317-T20A User’s Guide
22
CHAPTER 2
The Web Configurator
2.1 Overview
The web configurator is an HTML-based management interface that allows easy GPON Device setup
and management via Internet browser. Use Internet Explorer 8.0 and later versions or Mozilla
Firefox 3 and later versions or Safari 2.0 and later versions. The recommended screen resolution is
1024 by 768 pixels.
In order to use the web configurator you need to allow:
• Web browser pop-up windows from your GPON Device. Web pop-up blocking is enabled by
default in Windows XP SP (Service Pack) 2.
• JavaScript (enabled by default).
• Java permissions (enabled by default).
2.1.1 Accessing the Web Configurator
1 Make sure your GPON Device hardware is properly connected (refer to the Quick Start Guide).
2 Launch your web browser. If the GPON Device does not automatically re-direct you to the login
screen, go to http://192.168.1.1.
3 A password screen displays. To access the administrative web configurator and manage the GPON
Device, type the default username admin and password 1234 in the password screen and click
Login. If you have changed the password, enter your password and click Login.
Figure 8 Password Screen
4 The following screen displays if you have not yet changed your password. Enter a new password,
retype it to confirm and click Apply.