Chapter 4 Tutorials
PMG5317-T20A User’s Guide
48
• Access the shared files of your USB device from a computer
4.6.1 Set Up File Sharing
To set up file sharing you need to connect your USB device, enable file sharing and set up your
share(s).
Before enabling file sharing in the GPON Device, please set up your shares beforehand in the USB.
Also, the following special characters are not allowed for the USB share name: ", ', `, <, >, ^, $, |,
&, ;, \, /, :, *, and ?.
4.6.1.1 Activate File Sharing
1 Connect your USB device to the USB port at the back panel of the GPON Device.
2 Click Network Setting > USB Service > File Sharing. Select Enable and click Apply to activate
the file sharing function. The GPON Device automatically adds your USB device to the
Information.
4.6.1.2 Set up File Sharing on Your GPON Device
You also need to set up file sharing on your GPON Device in order to share files.
1 Click Add new Share in the File Sharing screen to configure a new user. Select your USB device
from the Volume drop-down list box.
To Next Page
Loading...
