Chapter 1 Introduction
PMG5317-T20A User’s Guide
18
Refer to Section 1.5 on page 17 for information on hardware connections.
1.6 The Reset Button
If you forget your password or cannot access the web configurator, you will need to use the RESET
button at the back of the device to reload the factory-default configuration file. This means that you
will lose all configurations that you had previously and the password will be reset to the default.
INTERNET
Green On The GPON Device has an IP connection but no traffic.
Blinking The GPON Device is sending or receiving IP traffic.
Off The GPON Device attempted to make an IP connection but failed.
Red On The GPON Device attempted to get an IP address but failed.
WLAN/WPS
Green On The wireless network is activated.
Blinking The GPON Device is communicating with other wireless clients.
Off The wireless network is not activated.
Amber Blinking The GPON Device is setting up a WPS connection with 2.4G-band.
LAN 1~4
Green On The GPON Device has a 10/100M/1000M Ethernet connection with
another device (such as a computer) on the Local Area Network (LAN)
through this port.
Blinking The GPON Device is sending/receiving data to/from the LAN through
this port.
Off The GPON Device does not have an Ethernet connection with the LAN
through this port.
PHONE 1~2
Green On A SIP account is registered for the phone port, and there’s no voice
message in the corresponding SIP account.
Blinking A telephone connected to the phone port has its receiver off the hook or
there is an incoming call, and there’s no voice message in the
corresponding SIP account.
Off The phone port does not have a SIP account registered.
Amber On A SIP account is registered for the phone port, and there’s voice
message in the corresponding SIP account.
Blinking A telephone connected to the phone port has its receiver off the hook or
there is an incoming call, and there’s voice message in the
corresponding SIP account.
Off The phone port does not have a SIP account registered.
USB
Green On The GPON Device recognizes a USB connection through the USB slot.
Blinking
The GPON Device is sending or receiving data to or from the USB device
connected to it.
Off The GPON Device does not detect a USB connection through the USB
slot.
LOS
Red On The GPON Device’s sensibility of receiving is less than -35dbm.
Off The GPON Device is receiving normal optical sensibility.
Table 1 LED Descriptions
LED COLOR STATUS DESCRIPTION
To Next Page
Loading...
