ZyXEL Communications PMG5317-T20A - Using the File Sharing Feature

Chapter 4 Tutorials
PMG5317-T20A User’s Guide
47
4.5.1.3 Analog Phone Configuration
1 Click VoIP > Phone to open the Phone Device screen. Click the Edit icon next to Analog Phone
1 to configure the first phone port.
2 Select SIP 1 from the SIP Account in the SIP Account to Make Outgoing Call section to have
the phone (connected to the first phone port) use the registered SIP 1 account to make outgoing
calls.
3 Select the SIP 1 check box in the SIP Account(s) to Receive Incoming Call section to have the
phone (connected to the first phone port) receive phone calls for the SIP 3 account.
4 Click Apply to save your changes.
Tutorial: VoIP > Phone
4.5.1.4 Making a VoIP Call
1 Make sure you connect a telephone to the first phone port on the GPON Device.
2 Make sure the GPON Device is on and connected to the Internet.
3 Pick up the phone receiver.
4 Dial the VoIP phone number you want to call.
4.6 Using the File Sharing Feature
In this section you can:
• Set up file sharing of your USB device from the GPON Device