Chapter 11 Network Address Translation (NAT)
PMG5317-T20A User’s Guide
155
11.3 The Applications Screen
This screen provides a summary of all NAT applications and their configuration. In addition, this
screen allows you to create new applications and/or remove existing ones.
To access this screen, click Network Setting > NAT > Applications. The following screen
appears.
Figure 70 Network Setting > NAT > Applications
The following table describes the labels in this screen.
11.3.1 Add New Application
This screen lets you create new NAT application rules. Click Add New Application in the
Applications screen to open the following screen.
Server IP
Address
Enter the inside IP address of the virtual server here.
Protocol
Select the protocol supported by this virtual server. Choices are TCP, UDP, or TCP/UDP.
OK Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving.
Table 47 Port Forwarding: Add/Edit (continued)
LABEL DESCRIPTION
Table 48 Network Setting > NAT > Applications
LABEL DESCRIPTION
Add New
Application
Click this to add a new NAT application rule.
Application
Forwarded
This field shows the type of application that the service forwards.
WAN Interface This field shows the WAN interface through which the service is forwarded.
Server IP
Address
This field displays the destination IP address for the service.
Modify Click the Delete icon to delete the rule.
To Next Page
Loading...
