Chapter 10 Quality of Service (QoS)
PMG5317-T20A User’s Guide
134
Traffic Policing
Traffic policing is the limiting of the input or output transmission rate of a class of traffic on the
basis of user-defined criteria. Traffic policing methods measure traffic flows against user-defined
criteria and identify it as either conforming, exceeding or violating the criteria.
The GPON Device supports three incoming traffic metering algorithms: Token Bucket Filter (TBF),
Single Rate Two Color Maker (srTCM), and Two Rate Two Color Marker (trTCM). You can specify
actions which are performed on the colored packets. See Section 10.8 on page 146 for more
information on each metering algorithm.
10.3 The Quality of Service General Screen
Click Network Setting > QoS > General to open the screen as shown next.
Use this screen to enable or disable QoS and set the upstream bandwidth. See Section 10.1 on
page 132 for more information.
Figure 58 Network Settings > QoS > General
Traffic
Time
Traffic Rate
Traffic
Time
Traffic Rate
(Before Traffic Policing) (After Traffic Policing)