Chapter 7 Wireless
PMG5317-T20A User’s Guide
83
Finding Out More
See Section 7.9 on page 97 for advanced technical information on wireless networks.
7.2 The General Screen
Use this screen to enable the Wireless LAN, enter the SSID and select the wireless security mode.
Note: If you are configuring the GPON Device from a computer connected to the wireless
LAN and you change the GPON Device’s SSID, channel or security settings, you will
lose your wireless connection when you press Apply to confirm. You must then
change the wireless settings of your computer to match the GPON Device’s new
settings.
Click Network Setting > Wireless to open the General screen.
To Next Page
Loading...
