Chapter 4 Tutorials
PMG5317-T20A User’s Guide
49
2 Click Browse to browse through all the files on your USB device. Select the folder that you want to
add as a share. In this example, select BobShare. Click Apply.
If the share names include the following special characters: ", ', `, <, >, ^, $, |, &, ;, \, /, :, *, and
?, the following screen will appear. To avoid this, please correct your share names in the USB, and
repeat the steps above.
3 It’s mandatory for you to add a description for the share. Also, if you want the share to be accessed
by users connecting to the GPON Device, you can select Public in Access Level or select Security
to specific users’ use only. Please note that you need to create the users’ accounts that are eligible
to access the secure shares beforehand under Account Management, if you want to configure the
Access Level to Security. For detailed information, please refer to the steps below. The Add
Share Directory screen should look like the following. Click Apply to finish.
Tutorial: USB Services > File Sha ring > Sha re Config uration
To Next Page
Loading...
