Chapter 4 Tutorials
PMG5317-T20A User’s Guide
59
3 Click Classification Setup > Add new Classification to create a new class. Select Enable in
Active field and follow the settings as shown in the screen below.
Tutorial: Advanced > QoS > Class Setup
FIELD TO
CONFIGURE
HOW TO CONFIGURE
Class Name Give a class name to this traffic, such as E-mail in this example.
From
Interface
This is the interface from which the traffic will be coming from. Select LAN1 for this
example.
Ether Type Select IP to identify the traffic source by its IP address or MAC address.
IP Address Type the IP address of your computer - 192.168.1.23. Type the IP Subnet Mask if you
know it.
To Next Page
Loading...
