Chapter 10 Quality of Service (QoS)
PMG5317-T20A User’s Guide
136
Figure 59 Network Setting > QoS > Queue Setup
The following table describes the labels in this screen.
Table 36 Network Setting > QoS > Queue Setup
LABEL DESCRIPTION
Add New Queue Click this button to create a new queue entry.
# This is the index number of the entry.
Status This field displays whether the queue is active or not. A yellow bulb signifies that this queue
is active. A gray bulb signifies that this queue is not active.
Name This shows the descriptive name of this queue.
Interface This shows the name of the GPON Device’s interface through which traffic in this queue
passes.
Priority This shows the priority of this queue.
Weight This shows the weight of this queue.
Buffer
Management
This shows the queue management algorithm used for this queue.
Queue management algorithms determine how the GPON Device should handle packets
when it receives too many (network congestion).
Rate Limit This shows the maximum transmission rate allowed for traffic on this queue.
Modify Click the Edit icon to edit the queue.
Click the Delete icon to delete an existing queue. Note that subsequent rules move up by
one when you take this action.
To Next Page
Loading...
