Chapter 17 Parental Control
PMG5317-T20A User’s Guide
194
Click Security > Parental Control > Add New PCP > Add New Service to open the following
screen.
Figure 106 Parental Control Rule: Add/Edit Rule > Add New Service
The following table describes the fields in this screen.
Redirect
blocked site to
ZyXEL Family
Safety page
Select this to redirect users who access any blocked websites listed above to the ZyXEL
Family Safety page as shown next.
Figure 105 ZyXEL Family Safety Page Example
OK Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving.
Table 78 Parental Control Rule: Add/Edit > Add New Service
LABEL DESCRIPTION
Service Name Select the name of the service. Otherwise, select User Define and manually specify the
protocol and the port of the service.
If you have chosen a pre-defined service in the Service Name field, this field will not be
configurable.
Protocol Select the transport layer protocol used for the service. Choices are TCP, UDP, or TCP &
UDP.
Port Enter the port of the service.
If you have chosen a pre-defined service in the Service Name field, this field will not be
configurable.
Table 77 Parental Control Rule: Add/Edit (continued)
LABEL DESCRIPTION
To Next Page
Loading...
