ZyXEL Communications PMG5317-T20A - Page 71

Chapter 5 Network Map and Status Screens
PMG5317-T20A User’s Guide
71
Action If the SIP account is already registered with the SIP server, the Account Status field
displays Registered.
Click Unregister to delete the SIP account’s registration in the SIP server. This does not
cancel your SIP account, but it deletes the mapping between your SIP identity and your
IP address or domain name.
If the SIP account is not registered with the SIP server, the Account Status field
displays Not Registered.
Click Register to have the GPON Device attempt to register the SIP account with the
SIP server.
The button is grayed out if the SIP account is disabled.
Account Status This field displays the current registration status of the SIP account. You have to register
SIP accounts with a SIP server to use VoIP.
In-active - The SIP account is not active. You can activate it in VoIP > SIP > SIP
Account.
Not Registered - The last time the GPON Device tried to register the SIP account with
the SIP server, the attempt failed. Use the Register button to register the account
again. The GPON Device automatically tries to register the SIP account when you turn
on the GPON Device or when you activate it.
Registered - The SIP account is already registered with the SIP server. You can use it to
make a VoIP call.
Service
Provider
This column displays the service provider name and SIP number for each SIP account.
URI This field displays the account number and service domain of the SIP account. You can
change these in the VoIP > SIP screens.
Table 6 Status Screen (continued)
LABEL DESCRIPTION