Chapter 6 Broadband
PMG5317-T20A User’s Guide
79
Select Manually Configured if you have the IPv4 address of the relay server. Otherwise,
select Automatically configured by DHCPC to have the GPON Device detect it
automatically through DHCP.
The Automatically configured by DHCPC option is configurable only when you set the
method of encapsulation to IPoE.
Service
Provider IPv6
Prefix
Enter an IPv6 prefix for tunneling IPv6 traffic to the ISP’s border relay router and connecting
to the native IPv6 Internet.
IPv4 Mask
Length
Enter the subnet mask number (1~32) for the IPv4 network.
Border Relay
IPv4 Address
When you select Manually Configured, specify the relay server’s IPv4 address in this field.
DHCPC Options (This is available only when you select IPv4 Only or IPv4 IPv6 DualStack in the IPv4/
IPv6 Mode field.)
Request
Options
Select Option 42 to have the GPON Device get the NTP server which is available to the
client.
Select Option 43 to have the GPON Device automatically add vendor specific information in
the DHCP packets to request the vendor specific options from the DHCP server.
Select Option 120 to have the GPON Device get the IP address or a fully-qualified domain
name of SIP server from DHCP.
Select Option 121 to have the GPON Device push static routes to clients.
Sent Options
option 60 Select this and enter the device identity you want the GPON Device to add in the DHCP
discovery packets that go to the DHCP server.
Vendor ID Enter the Vendor Class Identifier, such as the type of the hardware or firmware.
option 61 Select this and enter any string that identifies the device.
IAID Enter the Identity Association Identifier (IAID) of the device, for example, the WAN
connection index number.
DUID Enter the hardware type, a time value and the MAC address of the device.
option 125 Select this to have the GPON Device automatically generate and add vendor specific
parameters in the DHCP discovery packets that go to the DHCP server.
IPv6 Address (This is available only when you select IPv4 IPv6 DualStack or IPv6 Only in the IPv4/IPv6
Mode field.)
Obtain an IPv6
Address
Automatically
Select Obtain an IPv6 Address Automatically if you want to have the GPON Device use
the IPv6 prefix from the connected router’s Router Advertisement (RA) to generate an IPv6
address.
Static IPv6
Address
Select Static IPv6 Address if you have a fixed IPv6 address assigned by your ISP. When
you select this, the following fields appear.
IPv6
Address
Enter an IPv6 IP address that your ISP gave to you for this WAN interface.
Prefix
Length
Enter the address prefix length to specify how many most significant bits in an IPv6 address
compose the network address.
IPv6
Default
Gateway
Enter the IP address of the next-hop gateway. The gateway is a router or switch on the
same segment as your GPON Device's interface(s). The gateway helps forward packets to
their destinations.
IPv6 Routing Feature (This is available only when you select IPv4 IPv6 DualStack or IPv6 Only in the
IPv4/IPv6 Mode field. You can enable IPv6 routing features in the following section.)
Table 8 Network Setting > Broadband > Add New WAN Interface/Edit (Routing Mode) (continued)
LABEL DESCRIPTION
To Next Page
Loading...
