ZyXEL Communications UAG Series - Chapter 16 VPN 1-1 Mapping; 16.2 VPN 1-1 Mapping Commands

Chapter 16 Route
UAG CLI Reference Guide
120
16.4.1 Static Route Commands Examples
The following command sets a static route with IP address 10.10.10.0 and subnet mask
255.255.255.0 and with the next-hop interface wan1. Then use the show command to display the
setting.
Router(config)# ip route 10.10.10.0 255.255.255.0 wan1
Router(config)#
Router(config)# show ip route-settings
Route Netmask Nexthop Metric
===========================================================================
10.10.10.0 255.255.255.0 ge1 0