ZyXEL Communications UAG Series - Chapter 17 HTTP Redirect; 17.2 HTTP Redirect Commands

Chapter 17 Routing Protocol
UAG CLI Reference Guide
124
17.2.5 Learned Routing Information Commands
This table lists the commands to look at learned routing information.
17.2.6 show ip route Command Example
The following example shows learned routing information on the UAG.
Table 69 ip route Commands: Learned Routing Information
COMMAND DESCRIPTION
show ip route [kernel | connected | static | ospf | rip |
bgp]
Displays learned routing and other routing
information.
Router> show ip route
Flags: A - Activated route, S - Static route, C - directly Connected
O - OSPF derived, R - RIP derived, G - selected Gateway
! - reject, B - Black hole, L - Loop
IP Address/Netmask Gateway IFace Metric Flags Persist
===========================================================================
0.0.0.0/0 172.16.1.254 wan1 0 ASG -
127.0.0.0/8 0.0.0.0 lo 0 ACG -
172.16.1.0/24 0.0.0.0 wan1 0 ACG -
192.168.1.0/24 0.0.0.0 lan1 0 ACG -
192.168.2.0/24 0.0.0.0 lan2 0 ACG -
192.168.3.0/24 0.0.0.0 dmz 0 ACG -