ZyXEL Communications UAG Series - Chapter 43 Certificates; 43.2 Certificate Commands

UAG CLI Reference Guide 224
CHAPTER 44
User/Group
This chapter describes how to set up user accounts, user groups, and user settings for the UAG. You
can also set up rules that control when users have to log in to the UAG before the UAG routes traffic
for them (see Chapter 29 on page 158).
44.1 User Account Overview
A user account defines the privileges of a user logged into the UAG. User accounts are used in
firewall rules, in addition to controlling access to configuration and services in the UAG.
44.1.1 User Types
There are the types of user accounts the UAG uses.
Note: The default admin account is always authenticated locally, regardless of the
authentication method setting. (See Chapter 50 on page 250 for more information
about authentication methods.)
Table 137 Types of User Accounts
TYPE ABILITIES LOGIN METHOD(S)
Admin Users
Admin Change UAG configuration (web, CLI) WWW, TELNET, SSH, FTP
Limited-Admin Look at UAG configuration (web, CLI)
Perform basic diagnostics (CLI)
WWW, TELNET, SSH
Access Users
User Access network services
Browse user-mode commands (CLI)
WWW, TELNET, SSH
Guest Access network services WWW
Ext-User External user account WWW
ext-group-user External group user account WWW
guest-manager Create dynamic guest accounts WWW
pre-subscriber Access network services Web Authentication Portal
dynamic-guest Access network services
See Chapter 55 on page 269 for more information
about the dynamic guest accounts.
Web Authentication Portal