ZyXEL Communications UAG Series - Web Authentication Policy Insert Command Example

Chapter 29 Web Authentication
UAG CLI Reference Guide
165
29.2.7 Web Authentication Policy Insert Command Example
The following commands show how to insert a web authentication policy at position 1 of the
checking order. This policy applies endpoint security policies and uses the following settings:
•Activate: yes
• Description: EPS-on-LAN
• Source: use address object “LAN1_SUBNET”
• Destination: use address object “DMZ_Servers”
• User Authentication: required
• Schedule: no specified
• Endpoint security: Activate
• endpoint security object: use “EPS-WinXP” and “EPS-WinVista” for the first and second checking
EPS objects
Router# configure terminal
Router(config)# web-auth policy insert 1
Router(config-web-auth-1)# activate
Router(config-web-auth-1)# description EPS-on-LAN
Router(config-web-auth-1)# source LAN1_SUBNET
Router(config-web-auth-1)# destination DMZ_Servers
Router(config-web-auth-1)# authentication force
Router(config-web-auth-1)# no schedule
Router(config-web-auth-1)# eps activate
Router(config-web-auth-1)# eps 1 EPS-WinXP
Router(config-web-auth-1)# eps 2 EPS-WinVista
Router(config-web-auth-1)# exit