ZyXEL Communications UAG Series - Dynamic-Guest Command Example

Chapter 55 Dynamic Guest Accounts
UAG CLI Reference Guide
271
55.2.2 Dynamic-guest Command Example
This example shows how to create a dynamic guest account, configure the account related settings
and displays the account information.
remaining-time <1..25920000> Sets the amount of Internet access time (in seconds) remaining for the
account.
time-period <1..432000> Sets the total account of time (in minutes) the account can use to access
the Internet through the UAG.
Table 170 dynamic-guest Sub-commands (continued)
COMMAND DESCRIPTION
Router# configure terminal
Router(config)# dynamic-guest generate
[dynamic guest] username:gn0ti7, password:ihzun7
Router(config-dynamic-guest)# charge 5
Router(config-dynamic-guest)# expire-time 2013-06-26 14:00
Router(config-dynamic-guest)# payment-info cash
Router(config-dynamic-guest)# phone 0912345678
Router(config-dynamic-guest)# time-period 1440
Router(config-dynamic-guest)# remaining-time 86400
Router(config-dynamic-guest)# create-time 2013-06-25 14:03
Router(config-dynamic-guest)# exit
Router(config)# show dynamic-guest users
No. Status Username Create Time Expiration Time
Time Period Remaining Time Charge ayment Info Phone Num
User Role
====================================================================================
1 Unused gn0ti7 2013-06-25 14:03 2013-06-26 14:00
1day 00:00:00 1day 00:00:00 eur 5,00 cash 0912345678
billing-users
Router(config)#