ZyXEL Communications UAG Series - SMTP Redirect Command Examples

Chapter 23 SMTP Redirect
UAG CLI Reference Guide
144
23.2.2 SMTP Redirect Command Examples
The following commands create a SMTP redirect rule, enable it and display the settings.
Router# configure terminal
Router(config)# smtp-redirect 1
Router(smtp-redirect)# activate
Router(smtp-redirect)# interface lan2
Router(smtp-redirect)# server smtp.zyxel.com.tw
Router(smtp-redirect)# source lan1_1
Router(smtp-redirect)# user admin
Router(smtp-redirect)# exit
Router(config)# show smtp-redirect
smtp redirect rule: 1
active: yes
user: admin
incoming interface: lan2
source address: any
smtp server: smtp.zyxel.com.tw
Router(config)#