ZyXEL Communications UAG Series - 39.2.2 Service Group Commands

Chapter 42 Application Patrol
UAG CLI Reference Guide
211
42.2.1 Application Patrol Commands
This table lists the application patrol commands.
42.2.1.1 Application Patrol Command Examples
This command shows details of an application patrol profile created.
Table 130 app Commands: Application Patrol
COMMAND DESCRIPTION
app rename profile_name_old profile_name_new Renames an existing profile
[no] app log_sid Generates a log when traffic matches a signature in this category.
The no command disables it.
[no] app profile_name Creates a profile with the specified name. You may use 1-31
alphanumeric characters, underscores (
_), or dashes (-), but the first
character cannot be a number. This value is case-sensitive. The no
command disables it.
[no] description description Write a description of the App Patrol Profile.
application profile_name action
{forward|drop|reject} {no log|log
[alert]}
Sets the action and generates a log, log and alert or neither (no)
when traffic matches a signature in this profile. Actions are:
• forward - routes packets that matches these signatures.
• drop - silently drops packets that matches these signatures
without notification.
• reject - drops packets that matches these signatures and sends
notification.
no application-object profile_name Removes the application object from the named profile.
[no] app statistics collect Enables application patrol statistics gathering. The no command
disables it.
app statistics flush Clears all application patrol statistics.
show app statistics summary Shows a summary of application patrol statistics (if any).
show app statistics collect Shows if application patrol statistics gathering is enabled and if yes,
when.
show app signatures version Displays the App Patrol signature set version number. This number
gets larger as the set is enhanced.
show app signatures date Displays the date (yyyy-mm-dd) and time the set was released.
show app profiles profile_name Shows the description, application name, and object reference
number associated with the named profile.
show app profiles profile_name application Shows the application name, action and log associated with the
named profile.
Router# show app profiles
APP-patrol: 1
profile name: app1
description:
application: ultrasurf_app
ref: 1