ZyXEL Communications UAG Series - Web-Auth Type Profile Sub-Commands

Chapter 29 Web Authentication
UAG CLI Reference Guide
163
29.2.5 web-auth type profile Sub-commands
The following table describes the sub-commands for several web-auth type profile commands. Note
that not all rule commands use all the sub-commands listed here.
Table 97 web-auth type profile Sub-commands
COMMAND DESCRIPTION
customize Specifies the custom web portal file you want to use in this profile.
Note: You can upload zipped custom web portal files to the UAG using the
web configurator.
type {user-agreement | web-portal} Specifies the type of the web authentication page through which users
authenticate their connections.
user-agreement agreement-url url Sets the user agreement page’s URL; for example, http://IIS server IP
Address/logout.html. You can use up to 255 characters (0-9a-zA-Z;/
?:@&=+$\.-_!~*'()%) in quotes.
The Internet Information Server (IIS) is the web server on which the user
agreement files are installed.
[no] user-agreement idle-detection
[timeout <1..60>]
Sets the UAG to monitor how long each access user is logged in and idle (in
other words, there is no traffic for this access user). The UAG automatically
logs out the access user once the specified idle timeout has been reached.
user-agreement logon-re-auth-time
<0..1440>
Sets the number of minutes the user can be logged into the UAG in one
session before having to log in again.
[no] user-agreement welcome-url
<url>
Sets the welcome page’s URL; for example, http://IIS server IP Address/
logout.html. You can use up to 255 characters (0-9a-zA-Z;/?:@&=+$\.-
_!~*'()%) in quotes.
The
no command removes the URL and sets the UAG to use the welcome
page of internal user agreement file.
The Internet Information Server (IIS) is the web server on which the user
agreement files are installed.
[no] web-portal error-url url Sets the error page’s URL; for example, http://IIS server IP Address/
error.html. You can use up to 255 characters (0-9a-zA-Z;/?:@&=+$\.-
_!~*'()%) in quotes.
The
no command removes the URL.
The Internet Information Server (IIS) is the web server on which the web
portal files are installed.
web-portal login-url url Sets the login page’s URL; for example, http://IIS server IP Address/
login.html. You can use up to 255 characters (0-9a-zA-Z;/?:@&=+$\.-
_!~*'()%) in quotes.
The Internet Information Server (IIS) is the web server on which the web
portal files are installed.
[no] web-portal logout-url url Sets the logout page’s URL; for example, http://IIS server IP Address/
logout.html. You can use up to 255 characters (0-9a-zA-Z;/?:@&=+$\.-
_!~*'()%) in quotes.
The no command removes the URL.
The Internet Information Server (IIS) is the web server on which the web
portal files are installed.