Chapter 12 Auto-Healing
UAG CLI Reference Guide
83
12.2.1 Auto-Healing Examples
This example enables auto-healing and sets the power level (in dBm) to which the neighbor APs of
the failed AP increase their output power.
auto-healing margin Enters a number from 0 to 9. This value is used to calculate the
power level (power-threshold + margin) to which the neighbor
APs of the failed AP increase their output power in order to
extend their wireless service coverage areas.
auto-healing update Sets all manged APs to immediately scan their neighborhoods
three times in a row and update their neighbor lists to the AP
controller (UAG).
show auto-healing config Displays the current auto-healing configuration.
Table 34 Command Summary: Auto-Healing (continued)
COMMAND DESCRIPTION
Router(config)# auto-healing activate
Router(config)# auto-healing power-threshold -70
Router(config)# show auto-healing config
auto-healing activate: yes
auto-healing interval: 10
auto-healing power threshold: -70 dBm
auto-healing healing threshold: -85 dBm
auto-healing margin: 0
Router(config)#
To Next Page
Loading...
