UAG CLI Reference Guide 186
CHAPTER 37
Free Time
37.1 Free Time Overview
With Free Time, the UAG can create dynamic guest accounts that allow users to browse the
Internet free of charge for a specified period of time.
37.2 Free-Time Commands
The following table lists the free-time commands. You must use the configure terminal
command to enter the configuration mode before you can use these commands.
Table 116 free-time Commands
COMMAND DESCRIPTION
[no] free-time activate Turns on the free time feature to allow users to get a free account for
Internet surfing during the specified time period.
The no command disables the free time feature.
[no] free-time deliver-method
onscreen
Sets the UAG to display the user account information in the web screen.
The no command sets the UAG to not display the user account information in
the web screen.
[no] free-time deliver-method sms Sets the UAG to send account information in an SMS text message to the
user’s mobile device.
The no command sets the UAG to not send account information in an SMS
text message to the user’s mobile device.
[no] free-time maximum-register-
number <1..5>
Specifies the maximum number of the users that are allowed to log in for
Internet access with a free guest account before the time specified using the
free-time reset-register command.
The no command resets the setting to its default value (1).
[no] free-time reset-register hh:mm Sets the time in 24-hour format at which the new free time account is
allowed to access the Internet.
The no command resets the setting to its default value (00:00).
[no] free-time time-period
time_period
Sets the duration of time period (in minutes) for which the free time account
is allowed to access the Internet.
time_period: x - y, where x and y depend on the UAG model.
The no command resets the setting to its default value (30).
show free-time status Displays the free time settings.
To Next Page
Loading...
