Chapter 21 VPN 1-1 Mapping
UAG CLI Reference Guide
137
The following table describes the commands available for VPN 1-1 mapping. You must use the
configure terminal command to enter the configuration mode before you can use the
configuration commands.
Table 78 Command Summary: vpn-1-1-map
COMMAND DESCRIPTION
[no] vpn-1-1-map activate Enables VPN 1-1 mapping on the UAG. The no command disables VPN
1-1 mapping on the UAG.
[no] vpn-1-1-map pool profile_name Enters the vpn-1-1-map pool sub-command mode to create the
specified VPN 1-1 mapping pool profile. See Table 79 on page 138 for
the sub-commands. The no command removes the pool profile.
A pool profile defines the public IP address(es) that the UAG assigns to
the matched users and the interface through which the user’s traffic is
forwarded.
[no] vpn-1-1-map rule <1..16> Enters the vpn-1-1-map rule sub-command mode to create the
specified VPN 1-1 mapping rule. See Table 80 on page 138 for the sub-
commands. The no command removes the rule.
vpn-1-1-map pool rename profile_name
profile_name
Renames the specified VPN 1-1 mapping pool profile (first
profile_name) to the specified name (second profile_name).
vpn-1-1-map rule append Enters the vpn-1-1-map rule sub-command mode to create a new VPN
1-1 mapping rule at the end of the current list. See Table 80 on page
138 for the sub-commands.
vpn-1-1-map rule flush Clears all VPN 1-1 mapping rules.
vpn-1-1-map rule insert <1..16> Enters the vpn-1-1-map rule sub-command mode to add a new VPN 1-
1 mapping rule before the specified rule number. See Table 80 on page
138 for the sub-commands.
vpn-1-1-map rule move <1..16> to <1..16> Moves the specified rule to the specified location and renumbers the
other rules accordingly.
show vpn-1-1-map activation Shows whether the VPN 1-1 mapping feature is enabled or disabled on
the UAG.
show vpn-1-1-map pool [profile_name] Displays settings of the specified or all pool profiles.
show vpn-1-1-map rule [<1..16>] Displays settings of the specified or all VPN 1-1 mapping rules.
show vpn-1-1-map rule begin <1..16> end
<1..16>
Displays settings for a range of VPN 1-1 mapping rules.
show vpn-1-1-map statistics summary Displays statistics for each of the VPN 1-1 mapping rules
show vpn-1-1-map user-mapping summary Displays the status of the active users to which the UAG applied a VPN
1-1 mapping rule
To Next Page
Loading...
