Chapter 29 Web Authentication
UAG CLI Reference Guide
159
web-auth policy append Creates a new condition for forcing user authentication at the end of the
current list and enters sub-command mode. See Table 94 on page 161 for
the sub-commands.
web-auth policy insert <1..1024> Creates a new condition for forcing user authentication at the specified
location, renumbers the other conditions accordingly, and enters sub-
command mode. See Table 94 on page 161 for the sub-commands.
web-auth policy delete <1..1024> Deletes the specified condition.
To modify a condition, you can insert a new condition (N) and then delete
the one (N+1) that you want to modify.
web-auth policy flush Deletes every condition.
web-auth policy move <1..1024> to
<1..1024>
Moves the specified condition to the specified location and renumbers the
other conditions accordingly.
web-auth type default-user-agreement Enters sub-command mode to configure the default user agreement pages
and related settings. See Table 95 on page 162 for the sub-commands.
web-auth type default-web-portal Enters sub-command mode to configure the default login page and related
settings. See Table 96 on page 162 for the sub-commands.
web-auth type profile profile_name Enters sub-command mode to create an authentication type profile. See
Table 97 on page 163 for the sub-commands.
web-auth type rename profile_name_old
profile_name_new
Gives an existing authentication type profile a new name.
web-auth user-agreement Enters sub-command mode to configure user agreement pages and related
settings. See Table 98 on page 164 for the sub-commands.
show web-auth activation Displays whether forcing user authentication is enabled or not.
show web-auth default-rule Displays settings of the default web authentication policy.
show web-auth exceptional-service Displays services that users can access without user authentication.
show web-auth method Displays whether a client is to authenticate with the UAG through the
specifically designated web portal or user agreement page when web
authentication is enabled.
show web-auth policy {<1..1024> | all} Displays details about the policies for forcing user authentication.
show web-auth portal status Displays the web portal page settings.
show web-auth status Displays the web portal page or user agreement page settings.
show web-auth type customize-zip
{user-agreement | web-portal}
Displays the custom web portal or user agreement files uploaded to the
UAG.
show web-auth type {default-user-
agreement | default-web-portal |
summary}
Displays the settings for the specified web authentication page type, or the
summary of the authentication type profiles on the UAG.
show web-auth type profile
profile_name
Displays the settings of the specified authentication type profile.
show web-auth user-agreement status Displays the user agreement page settings.
Table 92 web-auth Commands (continued)
COMMAND DESCRIPTION
To Next Page
Loading...
