ZyXEL Communications UAG Series - 46.1.1 Endpoint Security Commands Summary; 46.1.2 Endpoint Security Object Commands

Chapter 45 Application Object
UAG CLI Reference Guide
234
45.1.2.1 object-group application Examples
These are some example usage commands.
Router(config)# show object-group application
Name
Description Ref
Member
===============================================================================
Router(config)# object-group application may
Router(group-application)# description rinse after use
Router(group-application)# exit
Router(config)# show object-group application
Name
Description Ref
Member
===============================================================================
may
rinse after use 0
tests
Router(config)#