Chapter 63 Packet Flow Explore
UAG CLI Reference Guide
320
The following example shows all activated 1-to-1 NAT rules.
The following example shows the default WAN trunk settings.
Router> show system snat nat-1-1
No. VS Name Source Destination Outgoing SNAT
===========================================================================
Router> show system snat default-snat
Incoming Outgoing SNAT
===========================================================================
Internal Interface External Interface Outgoing Interface IP
Internal Interfaces: lan1, lan2, dmz
External Interfaces: wan1, wan2, wan1_ppp, wan2_ppp
Router>
To Next Page
Loading...
