Chapter 1 Command Line Interface
ZyWALL (ZLD) CLI Reference Guide
13
Enter the user name and password at the prompts.
" The default login username is admin and password is 1234. The username
and password are case-sensitive.
1.2.2 Web Configurator Console
" Before you can access the CLI through the web configurator, make sure your
computer supports the Java Runtime Environment. You will be prompted to
download and install the Java plug-in if it is not already installed.
When you access the CLI using the web console, your computer establishes a SSH (Secure
SHell) connection to the ZyWALL. Follow the steps below to access the web console.
1 Log into the web configurator.
2 Click the Console icon in the top-right corner of the web configurator screen.
3 If the Java plug-in is already installed, skip to step 4.
Otherwise, you will be prompted to install the Java plug-in. If the prompt does not
display and the screen remains gray, you have to download the setup program.
4 The web console starts. This might take a few seconds. One or more security screens
may display. Click Yes or Always.
Figure 3 Web Console: Security Warnings
Finally, the User Name screen appears.
To Next Page
Loading...
