EasyManua.ls Logo

ZyXEL Communications ZYWALL USG CLI - 33.4 Time and Date

ZyXEL Communications ZYWALL USG CLI
342 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 33 System
ZyWALL (ZLD) CLI Reference Guide
253
33.3 Host Name Commands
The following table describes the commands available for the hostname and domain name.
You must use the
configure terminal command to enter the configuration mode before
you can use these commands.
33.4 Time and Date
For effective scheduling and logging, the ZyWALL system time must be accurate. The
ZyWALL’s Real Time Chip (RTC) keeps track of the time and date. There is also a software
mechanism to set the time manually or get the current time and date from an external server.
login-page title title Sets the title for the top of the login screen. Use up to 64
printable ASCII characters. Spaces are allowed.
login-page window-color {color-rgb |
color-name | color-number}
Sets the color of the login page’s window border.
logo background-color {color-rgb |
color-name | color-number}
Sets the color of the logo banner across the top of the login
screen and access page.
logo floor-color {color-rgb | color-
name | color-number}
Sets the color of the line below the logo banner that goes across
the top of the login screen and access page.
show access-page settings Lists the current access page settings.
show login-page default-title Lists the factory default title for the login page.
show login-page settings Lists the current login page settings.
show logo settings Lists the current logo background (banner) and floor (line below
the banner) settings.
show page-customization Lists whether the ZyWALL is set to use custom login and access
pages or the default ones.
Table 146 Command Summary: Customization (continued)
COMMAND DESCRIPTION
Table 147 Command Summary: Host Name
COMMAND DESCRIPTION
[no] domainname domain_name Sets the domain name. The
no command removes the domain
name.
domain_name: This name can be up to 254 alphanumeric
characters long. Spaces are not allowed, but dashes “-” and
underscores “_” are accepted.
[no] hostname hostname Sets a descriptive name to identify your ZyWALL. The
no
command removes the host name.
show fqdn Displays the fully qualified domain name.

Table of Contents

Related product manuals