ZyWALL (ZLD) CLI Reference Guide
99
CHAPTER 11
Virtual Servers
This chapter describes how to set up, manage, and remove virtual servers.
11.1 Virtual Server Overview
Virtual server is also known as port forwarding or port translation.
Virtual servers are computers on a private network behind the ZyWALL that you want to make
available outside the private network. If the ZyWALL has only one public IP address, you can
make the computers in the private network available by using ports to forward packets to the
appropriate private IP address.
11.2 Virtual Server Commands Summary
The following table describes the values required for many virtual server commands. Other
values are discussed with the corresponding commands.
The following table lists the virtual server commands.
Table 53 Input Values for Virtual Server Commands
LABEL DESCRIPTION
service_object The name of a service. You may use 1-31 alphanumeric characters,
underscores(
_), or dashes (-), but the first character cannot be a number. This
value is case-sensitive.
profile_name The name of the virtual server. You may use 1-31 alphanumeric characters,
underscores(
_), or dashes (-), but the first character cannot be a number. This
value is case-sensitive.
Table 54 ip virtual-server Commands
COMMAND DESCRIPTION
show ip virtual-server [profile_name] Displays information about the specified virtual
server or about all the virtual servers.
no ip virtual-server profile_name Deletes the specified virtual server.
To Next Page
Loading...
