ZyXEL Communications ZYWALL USG CLI - List of Sub-Commands or Required User Input

Chapter 1 Command Line Interface
ZyWALL (ZLD) CLI Reference Guide
19
Figure 9 Help: Available Commands Example 1
Figure 10 Help: Available Command Example 2
1.6.2 List of Sub-commands or Required User Input
To view detailed help information for a command, enter <command> <sub command> ?.
Figure 11 Help: Sub-command Information Example
Figure 12 Help: Required User Input Example
Router> ?
apply
clear
configure
copy
delete
------------------[Snip]--------------------
run
setenv
show
traceroute
write
Router>
Router> show ?
aaa
account
address-object
alg
------------------[Snip]--------------------
username
users
version
vrrp
zone
Router> show
Router(config)# ip telnet server ?
;
<cr>
access-group
port
|
Router(config)# ip telnet server
Router(config)# ip telnet server port ?
<1..65535>
Router(config)# ip telnet server port