Chapter 34 System Remote Management
ZyWALL (ZLD) CLI Reference Guide
270
34.12 Language Commands
Use the language commands to display what language the web configurator is using or
change it.
You must use the configure terminal command to enter the configuration
mode before you can use these commands.
Table 161 Command Summary: Language
COMMAND DESCRIPTION
language <English |
Simplified_Chinese |
Traditional_Chinese>
Specifies the language used in the web configurator
screens.
show language {setting | all} setting displays the current display language in the web
configurator screens.
all displays the available languages.
To Next Page
Loading...
