Chapter 24 User/Group
ZyWALL (ZLD) CLI Reference Guide
216
24.2.5 Additional User Commands
This table lists additional commands for users.
24.2.5.1 Additional User Command Examples
The following commands display the users that are currently logged in to the ZyWALL and
forces the logout of all logins from a specific IP address.
Table 125 username/groupname Commands Summary: Additional
COMMAND DESCRIPTION
show users {username | all | current} Displays information about the users logged onto
the system.
show lockout-users Displays users who are currently locked out.
unlock lockout-users ip | console Unlocks the specified IP address.
users force-logout ip | username Logs out the specified logins.
Router# configure terminal
Router(config)# show users all
No. Name Type From Service
Session Time Idle Time Lease Timeout Re-Auth. Timeout
===========================================================================
1 admin admin 192.168.1.34 http/https
00:33:27 unlimited 23:45:18 23:26:33
2 admin admin 192.168.1.34 http/https
00:14:31 unlimited 23:48:38 23:45:29
3 admin admin 172.23.23.83 http/https
00:04:07 unlimited 23:58:32 23:55:53
4 admin admin 172.23.23.83 telnet
00:03:30 unlimited 23:59:59 23:56:30
Router(config)# users force-logout 192.168.1.34
Logout user 'admin'(from 192.168.1.34): OK
Logout user 'admin'(from 192.168.1.34): OK
Total 2 users have been forced logout
Router(config)# show users all
No. Name Type From Service
Session Time Idle Time Lease Timeout Re-Auth. Timeout
===========================================================================
1 admin admin 172.23.23.83 http/https
00:04:31 unlimited 23:58:08 23:55:29
2 admin admin 172.23.23.83 telnet
00:03:54 unlimited 24:00:00 23:56:06
To Next Page
Loading...
